Wednesday, December 31, 2008
Tuesday, December 23, 2008
As Christmas gifts, since we usually end up having to travel in a car with our dogs and our luggage and several gifts, it has become easier to resort to giving the impersonal gift cards. Oh well. So, as an effort to make it a bit more personal, I decided to make my own gift card holder. :-) Anyway, I found this site that showed how to make Easy Peasy Snap Wallets and basically used the same technique with Christmas fabric and called them giftcard holders.
Here's how I did it:
- fabric (in this case Christmas... but can easily be for a birthday or any other occasion)
- interfacing (I don't know if this is really necessary, but it does make it slightly thicker to have)
- easy no sew snaps (trust me, these are the way to go if you are a beginner to sewing – super easy to use.)
1. Cut your fabric. You need two rectangles that are about 5 x 8.5 (I cut out a piece of paper to that shape as a guide.... and yes, TigerDirect.com is pretty awesome).
2. Cut your interfacing. You just need one rectangle of this... about 4 x 7.5, basically enough to cover the center area of one of the rectangle so it doesn't hit the sewing line.
3. Iron the interfacing on one of the rectangle fabrics (onto the wrong side of the fabric). You'll want to center the interfacing onto one of the rectangles and make sure that the smooth side is on top and the bumpy side is on the bottom. Then go ahead and iron it on, it should take a few seconds on each area. The interfacing will basically attach itself to the fabric.
4. Sew together the two rectangles with the right sides together and the wrong sides away from each other. You'll sew almost all the way around leaving a small opening in the middle of one of the small sides. See the picture for the sewing line. The small opening is on the right side.
5.Cut the corners off. This gives you cleaner corners when you invert the fabric.
6. Invert the fabric by pulling the inside out and the outside in.
7. Use a pen to form the corners from the inside.
8. Optional: Here I try to iron down the long edges flat on the sewing line. This makes a cleaner fold when you fold down on the sewing line. (I actually did this after step 10 then did step 9 again, but it probably would have made more sense to do it on before step 9.
9. Iron the edges of the rectangle. Particularly, fold and iron in the opening so that the edge is straight
10. Sew the edge with an opening from long side to long side.
11. Fold up the side with the sewn edge to form the pocket area.
12. Sew along both side edges, do a small reverse sew right where the folded up edge meets with the rest of the fabric.
13. You're done at this point. The only thing left to do is to add on the snaps. The craft blog (craftster.org) where I found the original easy peasy wallets also do a great job of explaining how to add on these snaps to the wallet. I wanted to do the instructions for these as well but, my pictures didn't come out... so just follow the instructions on the craftster site. Sorry!
14. Put the gift cards in, attach a gift tag inside, and give the gift to someone special.
I hope that gives an idea for this Christmas (tho, it might be a little late, sorry again), or maybe for other gifts throughout the year.... or maybe for a wallet or for a business card holder, or whatever. I've recently made a camo one to store some gift cards that I've recently received.
Also, as this will probably be the last post that I'll put out before Christmas, I'd like to wish you all a very Merry Christmas!
Sunday, December 21, 2008
Gingerbread cookies : I actually just wanted to decorate some cookies... I would have done a house, but those don't travel well. (maybe, a gingerbread car next year -- would be really cool to hook up a motor too? haha... I'm only half serious.)
Cranberry-Coconut Oatmeal cookies (I used a regular oatmeal cookies recipe, below, and added craisans and shredded coconut, very yummy)
Oatmeal Cookies: My cousin's fav.
Fudge with Marshmallows (My friend and I have dubbed this Geek Fudge because it's from one of the coolest foodie sites ever. I've mentioned before Cooking for Engineers)
Reese Peanut Butter Cup Cookies. I bought a bucket of cookie dough from one of my neighbor's kids for a school fundraiser. It's for a good cause, and it was easy and quick.
Fudge Brownies. I cheated here, this is from a boxed fudge brownie's set. It was in the cupboard, so I decided to go ahead and use it. Also easy and quick, and yummy.
Awesome Banana Muffins: These muffins are really good, and not overly sweet.
And that was my Sunday! Now to finish packing! ugh!
Tuesday, December 16, 2008
[12/17/08 Update]: Remember that disclaimer? Well, I did have to put extra sticky tape in the middle of the ribbons because a few of the ribbons fell down after about 6 hours (the one with heavier cards). This morning they were all still up tho. :-)
Saturday, December 13, 2008
Friday, December 12, 2008
I first got the idea from this site. Instead of dyeing regular paper, I dyed envelopes.
lots of paper towels
skewer (or something to stir with)
foam brush (optional – just for smoothening out the foam)
1. Spray some shaving cream into pan and spread it evenly onto the pan. Go easy, that stuff spreads a lot.
2. Put a couple drops of food coloring, whatever colors you'd like to use.
3. Stir the food coloring around some. I found that going in circles one direction works well for some really good designs. Also, don't over do the stirring, the swirls will not be as defined.
4. Put the envelope onto the foam and gently tap down so the foam/color hits a lot of the envelope.
5. Remove the envelope from the foam and blot the shaving cream off. Don't worry if you don't see the swirls when you first pick up the envelope from the foam. Once you blot, you should see the design. I've tried to wipe it down, and it smears the color – so I wouldn't suggest it. Blotting seems to work the best. Did I mention that you'll be using a lot of paper towels?
6. Once you got the shaving cream off, you just need to let it dry.
As an added bonus, the paper feels smooth and smells pretty good at the end of it all.
Thursday, December 4, 2008
Following my Thanksgiving blogs, a good friend of RadLinc Crafts, Captain Monkeypants, asked a few questions about the salmon that we had pictured. So, as I answered her, I thought that this was a perfect time to do a blog entry on it. I can't admit to being an expert to making this seeing as how I've only learned about making it (and about what it's called) earlier this year, but we've made it three times and so far so good.
Gravlax is a Scandinavian way of preparing salmon literally meaning “buried salmon.” I guess, back in the day, fresh salmon was buried under dry sand where it was fermented and cured. Nowadays, we can control conditions better by burying the salmon in a mixture of kosher salt, sugar, pepper and dill weed and “curing” the fish in our fridge. The recipe I'm following is taken from this really cool site for foodies called Cooking For Engineers.
The best parts about preparing this dish is it's easy (since you only need 5 ingredient), and it's delicious. The not so great part is that it takes 48 hours before you can taste the goods. So let's get started.
- 1 lb fresh salmon fillet (we used skinless)
- 2 tbsp kosher salt
- 2 tbsp sugar
- 2 tsp pepper (I used a 50:50 ratio of white and black pepper, mostly because I had it any combination should work fine tho)
- dill weed (a small bunch from the grocery store works well).
1. Lay down a big piece of saran wrap and place the salmon
2. Mix the salt, sugar and pepper together in a bowl.
3. Cover the salmon with the salt-sugar-pepper mixture... all over, both sides, and on the sides of those.
4. Divide the dill weed into two. Put one half on the top of the salmon and the other half on the under side of the salmon so the salmon is sandwiched between the dill.
6. Now you need to compress it. I used two pyrex dishes and three cans of corn. Stacked like this from bottom to top: pyrex dish, wrapped salmon, pyrex dish, three cans of corn.
8. After 48 hours, take the salmon out, drain the oil, toss the dill and saran wrap, and rinse the salmon really well.
9. Slice the salmon thinly using a fillet knife or an otherwise sharp knife.
We like to eat this on toasted bagels with some cream cheese. Crackers and baguette slices work really well too. This makes an awesome make ahead appetizer or a really good snack.
Wednesday, December 3, 2008
I was thinking about fusing some fabric onto cardstock one day, and decided to google up how to do it. Anyway, I found this site that shows how to make gift tags by fusing fabric onto cardstock. So, I gave it a try. Thought it would look really good with matching cinch bags like the ones I made a month or so ago. Anyway, here's my how-to.
- Card stock
- no sew adhesive (heat n bond) fusing material.
- Ironing board and iron
1. First, I start out with penciling the lines that I'm going to cut for the tags
2. Next, I cut the adhesive to the size of the cardstock.
4. Cut the fabric to the same size as the cardstock and adhesive.
5. Remove the paper side of the adhesive. The adhesive should stay with the cardstock as you peel the paper away.
6. Put together the fabric's wrong side to the cardstock's newly fused adhesive side and place onto ironing board fabric side up. Iron all together same rule as last time... about 2 seconds on each spot. Be careful when ironing the fabric on. Start with one side and work your way slowly to the other, or the fabric might bunch up. You should now have a good fuse between the cardstock and fabric. Let's finish it up.
7. Alright, so remember those lines you drew on? Time to use them and cut out your tags. Don't forget to erase the lines once your done.
8. Use a hole puncher, and punch a hole out for the ribbon. I used an 8” piece of ribbon for a tie down.
9. In addition, you can stamp on a To:/From: label onto the card... and there you have it. Optionally, instead of drawing lines or stamping, you can print out some gift tag designs onto cardstock and fuse fabric on the other side.