Showing posts with label nylon flowers. Show all posts
Showing posts with label nylon flowers. Show all posts

Sunday, June 24, 2012

Flower Pens



Here's a really easy project to disguise simple looking pens to look like a pretty flower.  I made some for our wedding reception and put it next to the guest pages we had.

Here's what you need.


- a pen.  I use the papermate ball points.  It has to be one where you can remove the top cap.
- a flower (nylon or silk)
- ribbon
- floral tape
- regular tape
- craft glue

Okay, so here we go:


1.  Prepare your flower (nylon or silk).  Cut to about a half inch stem to the place you want resting on the top of the flower.  Sometimes this is the flower base, and sometimes it is about where the leaf is.  Your call.  Add a little floral tape to the half inch stem so it fits in the pen top cap area. (you may want to test the flower in the top cap before you start wrapping -- like after the next step).  Set aside while you set up the pen.

2.  Disassemble your pen by removing the cap, and top cap.

3.  Use a small piece of tape and tape the ribbon to the pen.  The tape should only be on a small part of the ribbon, that can be covered up easily when we wrap the rest of the pen.  Notice that I taped the ribbon about a half inch from where the ink part of the pen is.   This is because if you put the ribbon too close, you won't be able to put the cap back on.

4.  With the end of the ribbon affixed, carefully wrap a layer of floral tape around the pen.  This will cover up the slick area of the regular tape, and the rest of the pen to give a little grip when you wrap the ribbon on.

5.  Next, (you probably guessed), wrap the ribbon around the pen.  When you get to the end, wrap the ribbon perpendicular (so it follows the top edge of the pen).  Cut an extra inch, and fold up as shown on the last photo in the image above.  Hold this with one hand.



6.  With the other hand, take your flower, add a dab of glue to the bottom, and stick it into the hole of the pen (where the top cap once was).  Ta da!  :)



Pretty simple wasn't it.  For show, I took a terra cotta pot that my sister painted, added a small piece of paper in the bottom, and filled it with aquarium rocks.  Then, I stuck the pens in.  You can probably use colored sand too.

Sunday, June 17, 2012

Nylon Flower Daisy



Here's a really simple nylon flower to make.  I used these nylon flower daisies for the flower pens at our reception.

What you need:
- nylon
- stamens
- #24 wire
- #4 ring (or whatever size you want, really).
- stem wire
- nylon thread
- floral tape
optional:  if you want to attach a leaf, you'll also need some green nylon and green wire.  (instructions for leaf are not included in this post)

Okay, so let's get started.

How to:
For tips and techniques on Nylon Flower making, check out my post here.



1.  Wrap the #24 wire around the #4 ring, and twist together where wires meet.  Cut the wire so you have a wire petal handle of about an inch.  Make 7 petal rings using the #4 ring (or a different size, if  you prefer).

2.  Daisies are known for their long petals.  You can elongate all of the petal rings but holding them all together, and squeezing the wires to form a nice long petal.  Holding them all together also gives you more uniform petals throughout the flower.

3.  Wrap the petal rings with nylon, and secure with the nylon thread.  If you want a thicker look and feel, you can wrap the petal twice.



4.  Grab some double ended stamens and fold them in half.  Use some nylon thread to attach the stamens to the end of a stem wire, with the stamen ends above the stem wire so that the stem wire is not showing.

5.  Attach the wrapped petals around the stamens evenly with nylon thread one by one.  It may help to bend down the petals a bit after the first petal is put down.  Remember to try to keep the tie line the same as you attach the petals.  Also, you don't have to cut the nylon thread between each petal, you can continue to wrap around a few times, attach a petal and wrap around a few more times.  After all the petals are attached, wrap the nylon thread several more times up and down the petal handles to secure it more to the stem.

6.  Once all the petals are attached to the stem, you can cover up the petal handles and the nylon thread with floral tape.  Remember to stretch the tape as  you go to let it get sticky.  Wrap the floral tape down the stem.  If you have a petal to put in, you can attach it at this time (as you wrap the floral tape down).

7.  Gently fold down the petals to open up the flower.  You can and a slight bend down the middle of each petal to add more dimension to the flower.  You can also bend the stem wire a bit so the flower is front facing instead of facing straight up.



That's it.  Super simple flower to make.  You can add more stamens in the center and make the petals larger if you want a larger flower.  Because these were going to go on top of pens, I didn't make them too  large.  Have fun.

Friday, May 25, 2012

Our DIY Wedding

As mentioned in my previous post, Eric and I finally tied the knot on May 12.  Our wedding was an intimate home wedding at a rental home in Lake Tahoe, CA.  We planned the whole thing in about 4 months and did the majority of the wedding ourselves with the help of some awesome volunteers.  Eric did the planning for the food, and setup, while I did the planning for the details and decorations. I thought I'd show off some of our crafty wedding projects.  I'll do another post that that covers the food. :)



Both of us are t-shirt and jeans type of people, so the first thing we decided on were that we didn't want to wear dress shoes.  So, we decided that Chuck Taylors would be fun to wear, and is versatile enough that if guests were to wear them, they'd have options.  We decided that all of the wedding party should wear chucks, and we added onto the invitation that "Chuck Taylors are suggested, but not required".  To our surprise, most of our guests showed up wearing chucks. (yay!).

We decided against a traditional guest book and opted for a glass fishbowl, and a mad-lib type of guest book page.  We also created a blank one for those who didn't feel like filling a mad-lib page out.  We left stickers, and let people roll up the pages, affix stickers, and throw it into the fishbowl.  It was really cool. We had some funny responses, but with great advice. We also decided to order a photobook (actually, I got one free as a gift from David's Bridal, where I bought my dress) that we let people sign.  The last picture (bottom right), is a pot of nylon flower pens, so people can write on the pages, etc.


Here's a closer look at the mad-lib page.


The rental house we rented had a downstair game room type area with counters all around.  We used these to our advantage, and put all of the guest book things on the counter.  We created a card box by using an old picnic basket, and using one of our small chalkboards to tell people that it was a cards box.  I actually ended up re-lining the picnic basket because the original lining was red, and our colors (if you haven't noticed yet) were green and yellow.


My sister created this awesome candy bar full of yellow and green candy.  There were rock candy, lemonheads, appleheads, yellow, green and white jordan almonds, yellow and green jelly beans and m&m's.  Yellow and green lollipops, packets of juicy fruit gum and doublemint gum, lemon drops, frooties, sour apple belts, mango and lychee gel cups, and hugs and kisses (with little dot stickers on them - designed and cut out by us).  She made these cool circular fan decorations, that I think she found in Pinterest (love that site).  Also, instead of making a slide show of pictures, we opted for getting a few digital picture frames, and just letting it run with our pictures on them.  It was easy, and let people view them if they wanted, or not, if they didn't.  You can see one of the frames at the end of the candy bar.
 We also did our own flowers.  I watched tons of youtube videos, and learned to make bouquets corsages, and boutonnieres.  My mom did the arrangements for the urns that we used for decorations for the ceremony site.  For centerpieces (not pictured), we used small bottles and put a few flowers in each.  This worked great because our tables were rectangular, so we didn't want tall flowers that would just get in the way, plus this gave us more room for the wine and champagne glasses (important stuff!).  And with the rest of the flowers, several of us just had fun and tried our hand at arranging the remaining flowers in the remaining vases.  They all turned out really good and really put color around the reception areas.  We bought most of the flowers (roses, and carnations) thru costco.com.
 For favors, I wanted something that would look great, and would be useful to people after the wedding, so I came up with these.   Each favor consisted of 2 washcloths, a small glass, and an antibacterial bottle. I finished it off a tag shaped like a leaf.  I'll have a tutorial on this later.
Here are some other random things we had.  First we had our memorial candles.  I bought two candles from ikea, and two decals from Joann's.  The directions for the decals were easy enough to follow.  Below the candles is the tray Eric made out of acrylic to hold our veggie shooters.  The tray is basically an acrylic sheet with legs, that has drilled out holes.  The shot glasses we used for the shooters were small square plastic shot glasses that fit the holes so that people can easily pick up each one.  It's actually quite brilliant because it made set up super easy.  The middle picture is how our table setting looked.  We  cut burlap into strips and used that as a table runner, added the small vases of yellow and white flowers, and added a thick green ribbon around the napkin for color.  We used the chalkboard paint to create a larger chalkboard sign for the self serve wine bar.  Hanging off of the sign is one of the pomander (kissing) balls I posted about a few posts ago.  We used them for aisle decorations, which you can sort of see in the picture on the bottom right.


This last picture are some other random projects.  I took my old digital camera, added a little label to tell people to "Capture the memories, and pass it on."  With fresh batteries and a large memory card, we got some really cool pictures.  We designed and printed our own water bottle labels.  I also created wine glass charms with little tags that people could write their names on.  And lastly, I created little "Tears of Joy" packets, which were small packets with two tissues in them.

A few other things we did was set up a photo booth.  We bought an HD webcam, a license for some webcam software, and printed up or bought a bunch of photo booth props.  We also bought a small photo printer, hung some fabric for background and voila -- our own photo booth.  Everyone loved it!  I forgot to take pictures of the setup, but here's our photo booth photo.


Anyway, I hope you enjoyed the overview of our DIY wedding.  It was super fun.  I'll get a food post together soon. :)

Friday, March 25, 2011

Nylon Flowers: Daffodil


Daffodils are one of my favorite flowers.  I don't know if it's the vibrant yellow color, or if it's just usually the first flower I see popup in my garden during the spring time.  It's also the flower of hope, and particularly used for the American Cancer Society's Daffodil Days program.  So, I decided to make this my newest nylon flower project to pass on to you guys.

Materials:
 - #24 gold wire
 - #2 stem
 - yellow nylon
 - light green floral tape
 - nylon thread
 - stamen
 - rings (or a round with a diameter of about 1.5 inches)


1.  Cut 3 wires about 3 inches more than the length of around the ring.

2.  Holding two wires together twist together wires about 3 inches from one side.  Take the third wire, and twist it about 3 inches from the other side of one wire.  Take the two free wire ends and twist together about 3 inches from the end.  You should end up with a cone shape when you put together all the wire ends.

3. Put the wire ends together, and twist closed to form the cone shape.  You can attach it to the stem at this point, I attached it later, but either way works.  Bend the wire up and down around the opening of the cone.


4.  Open the nylon tube and place the stamen inside.  Next slide the tube in from the open part of the cone.

5.  Tie down the nylon end that meets in the closing of the cone with nylon thread.

6.  Stretch the other end of the nylon tube from inside the cone to outside to the twisted end (like shown).   Tie down with nylon thread.


7.  Make 5 petals using the #24 gold wire and the yellow nylon.  Stretch the petal wire forms before wrapping with nylon.

8.  Attach the 5 petals evenly around the cone shape of the daffodil, as shown.  Shape the petals around to have a somewhat pointy tips.

9.  Wrap the showing wires and nylon thread (under the flower) with the light green floral tape.

That's it, you have a daffodil. :)  For a few tips on making nylon flowers check out this post:  http://radlinccrafts.blogspot.com/2010/07/making-nylon-flowers-part-2-technique.html


Sunday, March 13, 2011

Let's have a Giveaway

The WINNER has been announced.  GIVEAWAY has ENDED! Thanks for entering!!
In honor of National Craft Month, I think we should have a giveaway to celebrate.  My friends at New Sheer Creations have been gracious enough to sponsor their new book for this giveaway.  "A Complete Guide to Nylon Flower Making: Basic and Advanced Techniques" by Hai Yan Chen is a great book full of beautiful pictures and a lot of detailed step by step images and instructions.  The author is a renowned master of the nylon flower art.

Here are some pictures of inside the book:




Okay... so the details of the Giveaway!!!!:  
Dates:  Now to March 31, 2011 11:59pm PST.
Prize:  A book : A Complete Guide to Nylon Flower Making: Basic and Advanced Techniques by Hai Yan Chen.
How to enter:  Leave a comment on this post before the end of March. Please make sure to leave a way for me to contact you (email, twitter userid).

Okay... let the contest begin.  :) The winner will be drawn in random and will be posted early April.  I have a nylon flower tutorial on the way (probably end of March or early April) and a few other things projects to share with you.  

Hope to hear from you soon.   Good Luck!

Oh BTW, if you want another chance to win, it looks like New Sheer Creations has a giveaway going on too... Go check it out!

Sunday, August 1, 2010

And The Winners Are....



First and foremost, I want to say thank you to all that entered the giveaway.  Also, a big and special thank you to the ladies at New Sheer Creations for sponsoring this giveaway. To pick the winners, I used Random.org.  Without further ado... the winners of the "The Art of Handmade Flowers" book are:

#10 (shivani) and #7 (chandrakala)



Congratulations to the both of you!  I will be emailing you both soon to get your shipping information.

Thanks again for reading Rad Linc Crafts. :)


 

Tuesday, July 20, 2010

Making Nylon Flowers, Part 3: Making Plumerias


Making Nylon Flower Series:  Part 1 |  Part 2  |  Part 3

This is the last post to our Making Nylon Flowers series.  In this post, I'm going to show you how to make nylon plumerias.  I, personally, like the delicate, yet simple look of a plumeria, and the fragrance of one is out of this world fantastic. Although we can't quite replicate the fragrance, we can try to replicate a long lasting version of the plumeria flower. :)  I apologize in advance for being too wordy, there's a lot of information to explain and cover.  So, let's get started.



Materials:

- Yellow /white variegated nylon (plumerias exist in a few other colors so this may be different)
- #24 white wire for making petals
- #2 stem wire
- #3 ring from the ring set
- nylon thread
- cotton balls
- light green floral tape

Monday, July 5, 2010

Making Nylon Flowers, Part 2: Technique



Making Nylon Flower Series:  Part 1 |  Part 2  |  Part 3

This continues our series of making nylon flowers.  In today's post I'm going to go thru some of the tips that I've learned along the way.

Okay, let's get on with the tips and techniques:


Wednesday, June 30, 2010

Making Nylon Flowers: Free Giveaway!!!

Making Nylon Flower Series:  Part 1 |  Part 2  |  Part 3


GIVEAWAY CONTEST HAS CLOSED. Thanks for all who have entered. 


Just a short post to announce this series giveaway.  The ladies from New Sheer Creations were nice enough to sponsor this series' giveaway prizes, so a special thanks to them... and if you haven't checked them out yet, go do it.  You'll love what you find (plus, they just lowered their prices for nylons.... 46 cents? you just can't beat that).

Okay, so let's get to the details.

2 Lucky Winners will get 
their very own copy of the book:


 "The Art of Handmade Flowers
by Jue Liu




Wednesday, June 16, 2010

Making Nylon Flowers, Part 1: Tools

Making Nylon Flower Series:  Part 1 |  Part 2  |  Part 3

This is the first part of a series of 3 posts talking about nylon flowers.

In this post we are going to discuss tools of the trade.  What they are, what they're used for, and where to get them.  I will be plugging my favorite nylon flower store, New Sheer Creations, a lot on this post and hope you check it out.  They have everything you need to start out, and really good prices.

Nylons

These are just your typical stocking fabric to the colors of your choosing. In the past, I have attempted to buy cheap ones and dye them myself, but I actually found that it's cheaper to just buy them, not to mention you have more range and consistency in the colors.  Tho, if you already have some around with runs, it would be a great way to recycle them into something pretty.  They come in many solid colors as well as aggregated colors that make your flowers look even more realistic.

Monday, June 7, 2010

Making Nylon Flowers: Series Forthcoming.

Making Nylon Flower Series:  Part 1 |  Part 2  |  Part 3

It's June.  I can't believe half the year is over and done with.  For June, I've decided to do a series on Nylon Flowers.  I've been teasing about making some posts on this subject for probably a year now, so it's about time I do so.  I've decided to split the series up in the following sections:

Part 1: Tools and Materials --- we'll discuss the tools and Materials that can be used for making nylon flowers.
Part 2: Technique, Making Petals and Assembly --- In this post, we'll discuss how to use the tools to make the flowers, some techniques that I've learned to make things a bit easier, and how basic assembly works.
Part 3:  Making Plumerias --- In this post, we'll actually make a plumeria branch.  I'll go thru additional techniques of making these flowers.